• Contact: salesteam@anelysis.com | Tel: (+30) 2111984600
0 item:
 x 

Your shopping cart is empty!

GRACO D32911 HUSKY 307 3/8″ POLYPROPYLENE DIAPHRAGM PUMP

HUSKY 3/8''(NPT) PP PUMP 26L/MIN-PP SEATS,PTFE BALLS,PTFE DIAPHRAGMS
527,00 €
254,91 €
For special prices or technical questions contact salesteam@anelysis.com
Manufacturer: Graco
Product Code:01525
Lead time : Contact salesteam@anelysis.com
| Availability:

Husky™ 307 Polypropylene AODD Plastic Pump w/NPT Standard Air Valve, Polypropylene Seat, PTFE Ball, & PTFE Diaph.

The Husky 307 air-operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.

Typical applications include oil transfer and evacuation, fuel dispense and transfer, windshield wash solution dispense, and water and anti-freeze dispense. Some models UL-approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil and lubricating oil.

  • Quick and easy assembly and disassembly design
  • Easy to service air valve and ball checks
  • Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
  • Split manifold option to pump multiple fluids without mixing
  • Every pump is tested prior to shipping
  • 3/8 in (9.52 mm) end porting
  • Delivery up to 7 gpm (26.5 lpm)
  • Easy-to-service air valve and ball checks

Technical Specifications

Application Industrial

Ball Material PTFE

Center Section Material Polypropylene

Compatible Material Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

Diaphragm Material PTFE/EPDM 2-Piece

Fluid Inlet Size (in) 0.375

Fluid Inlet Thread Gender Female

Fluid Inlet Thread Type NPT

Fluid Outlet Size (in) 3/8

Fluid Outlet Thread Gender Female

Fluid Outlet Thread Type NPT

Fluid Section Material Polypropylene

Inlet Size (in) 1/4

Inlet Thread Gender Female

Inlet Thread Type NPT

Manifold Configuration End Port

Manifold O-Ring Material PTFE

Material Polypropylene

Maximum Air Consumption (SCFM) 5.5

Maximum Air Pressure (psi) 100

Maximum Continuous Cycle Rate (CPM) 330

Maximum Flow Rate (GPM) 6.5

Maximum Fluid Pressure (psi) 100

Maximum Operating Temperature (°F) 150

Maximum Solid Size (in) 0.0625

Minimum Operating Temperature (°F) 40

Model Husky

Power Source Air

Seat Material Polypropylene

Series 307

Standards Met CE

Type Pneumatic Diaphragm Pump

PRODUCT BROCHURE

Ball/Check Valve Material
PTFE
Construction Material
Polypropylene
Diaphragm Material
PTFE
Seat Material
Polypropylene
Max Fluid Pressure
7 bar (0.7 MPa - 100 psi)
Max Flow
26.5 l/min (7.0 gpm)
Max Size Solids
1.5 mm (0.06 in)
Air Inlet Size
1/4 inch
Air Pressure Range
1.4 to 8.4 bar
Fluid Outlet
3/8 inch
Power Source
pneumatic

Contact Details

  • Address: Kimonos 6, 15127 Melissia
    Greece
  • Phone: (+30) 2111984600
  • Email: This email address is being protected from spambots. You need JavaScript enabled to view it.